Forklift Technology in China

stainless steel pallet trucks and other vehicles are different, it is classified, widely used, especially the electric forklift is environmentally friendly and no pollution, low noise. Forklift structure and work performance is also reflected in the technical requirements of the forklift, forklift technical requirements from the rated weight, load center distance, the maximum lifting height, mast, etc. composition.
1, the rated lifting capacity: to allow the weight of the goods carried by forklifts, generally reflected in the tonnage. When the fork on the center of gravity of the goods beyond the specified load center distance, due to the longitudinal stability of the forklift, lifting weight should be reduced accordingly.
2, the load center distance: fork carrying the weight of the cargo weight, the center of gravity to the vertical fork of the front wall of the horizontal distance T, in mm (mm) said.
3, the maximum lifting height: fork loading and then fully loaded with the maximum lifting height of the goods.
4, mast angle: forklift load in a solid flat on the ground, mast relative to its vertical position forward or backward maximum inclination. The role of anteversion is to facilitate the fork and unloading of goods; the role of backward angle when the forklift with cargo operation, the prevention of goods from the fork on the slide.
5, the maximum lifting speed: forklift loaded with goods, the maximum lifting speed, in m / min (m / min) said. Lifting speed too fast, prone to cargo damage and machine damage accident. At present the maximum lifting speed forklift has been increased to 20m / min.
6, driving speed; improve the speed of the forklift to improve the operating efficiency has a great impact. For an internal combustion forklift with a capacity of 1t, the maximum travel speed at full load is not less than 17m / min.
7, the minimum turning radius: forklift in the no-load low-speed driving, playing the steering wheel turn, the body of the outermost and most medial to the center of the minimum distance, called the minimum outside turning radius Rmin outside and the minimum inside turning radius rmin. The smaller the outer turning radius is, the smaller the floor area the forklift needs to turn, the better the maneuverability.
8, the minimum ground clearance: the distance between the fork and the ground.
9, the minimum channel width: forklift truck loading and unloading of the minimum channel width, different forklift for the width of the channel is not the same as manual forklift and electric forklift, forklift electric forklift relative to the manual point to a wide point.